Direct From Factory Xantrex Solar Starter Cable Kit

Description

Setting up a reliable solar power system doesn’t have to involve tangled wires or guesswork connections. The Xantrex Solar Starter Cable Kit steps in as your all-in-one solution, delivering pre-terminated, weather-tough cables that link your solar panels seamlessly to the charge controller and then to your battery bank. Perfect for RV enthusiasts, boat owners, or anyone chasing off-grid freedom, this kit cuts through installation headaches with smart design and rugged build quality.

Why This Cable Kit Stands Out in Solar Setups

Unlike basic extension cords or generic wiring, Xantrex cables prioritize safety and efficiency. They’re crafted with UV-stabilized insulation to shrug off harsh sun, rain, and temperature swings, ensuring your system performs year-round without cracking or degrading. The MC4 connectors are industry-standard goldlocking tight for minimal power loss and maximum conductivity. No soldering irons or crimping tools needed; just plug and go.

Engineered for real-world abuse, these cables handle the vibrations of mobile adventures and the freeze-thaw cycles of remote cabins. Users rave about how the built-in protectionslike the 30A inline fuseprevent costly overloads, giving peace of mind during those long boondocking trips.

Key Components That Make Wiring Effortless

• 20-Foot PV Cables (Black/Red Pair): MC4-type ends connect straight from your panels to the charge controller. Ferrule terminations slide into place for rock-solid contact.
• 10-Foot Battery Cables (Black/Red Pair): Bridge the charge controller to your battery with ring terminals for secure battery posts. The red cable includes a 30A DC ATC fuse to safeguard against shorts.

Every cable is color-coded for foolproof polarityno crossed wires here. At 10-gauge thickness, they support amps up to the fuse rating without excessive voltage drop, ideal for panels pulling 100-400W.

Simple Step-by-Step Installation Guide

Transform your solar array in under 30 minutes with this straightforward process:

1. Position your panels and route the 20-foot PV cables from panel MC4 outputs to the charge controller’s PV inputs. Twist-lock the connectors securely.
2. Attach the other ends of the PV cables to the charge controller’s ferrule-compatible terminals.
3. Connect the 10-foot battery cables: red (fused) to positive controller output and battery terminal; black to negative.
4. Double-check polarities, secure with zip ties, and fire up your system. Monitor initial output to confirm smooth operation.

Pro tip: Always disconnect the battery first during setup to avoid sparks. For longer runs, consider upsizing wire gauge separately, but this kit nails most compact systems.

Perfect Matches for Your Solar Ecosystem

This kit pairs flawlessly with popular Xantrex charge controllers like the XML series or any MPPT/PWM unit with MC4 and ferrule inputs. It’s a natural fit for flexible panels up to 200W per string, keeping your vanlife or cabin rig humming. Van dwellers especially love how the lengths accommodate roof-to-controller routing without excess slack.

Long-Term Reliability and Maintenance Tips

Xantrex backs this kit with their reputation for marine-grade toughnessthink salt spray resistance for boaters. To keep it thriving:

• Inspect connections quarterly for corrosion; clean with a dry cloth.
• Avoid sharp bends that could stress insulation.
• Store extras coiled loosely to prevent kinks.

Over time, these cables maintain low resistance, squeezing every watt from your panels compared to DIY hacks that corrode fast.

Frequently Asked Questions

What sizes are the cables in the Xantrex Solar Starter Cable Kit?

The kit includes a pair of 20-foot MC4 PV cables for panel-to-controller runs and a pair of 10-foot battery cables for controller-to-battery connections, striking the right balance for most mobile solar setups.

Are these cables suitable for outdoor use in all weather?

Yes, they’re fully weather-resistant with UV protection and sealed connectors, built to endure rain, snow, intense sun, and temperatures from -40°F to 185°F.

Does the kit include fusing for safety?

Absolutelythe red battery cable has a pre-installed 30A DC ATC fuse to protect against overcurrent, a crucial safety feature often overlooked in basic kits.

What type of connectors does this kit use?

MC4 connectors on PV cables for universal panel compatibility, ferrules for charge controller hookups, and ring terminals for secure battery attachments.

Can I use this kit with non-Xantrex charge controllers?

Yes, it’s compatible with any controller accepting MC4 PV inputs and ferrule or screw terminalsjust match the amp rating to your system’s needs.

Is this kit expandable for larger solar arrays?

It supports small-to-medium arrays up to about 400W; for bigger systems, add parallel MC4 combiners or longer fused cables as needed.

With over 2,000 points of contact per cell, the Xantrex Solar Max panels are precision-engineered to ensure long-lasting performance in the toughest weather conditions. The mesh-grid technology combined with monocrystalline PERC cells provides superior durability, reliability, and performance compared to traditional busbar technology. Subjected to extreme environmental and accelerated life cycle testing beyond regulatory standards, Solar Max was tested to be 50X more durable and can harvest up to 20 Percent more energy than a standard flexible panel.

Xantrex 7080150 Attributes

• Length: 10 Feet/ 20 Feet
• Color: Black And Red
• Style: Roll

Xantrex 7080150 Features & Benefits

• State-Of-The-Art Mesh-Grid Technology
• Ultra Durable, Reliable, And Weather-Resistant
• 20 Percent Energy Output Advantage Vs Standard Flex Panels
• Peel-And-Stick Installation
• Limited 5 Year Warranty

Solar Starter Cable Kit

Xantrex’s Solar Starter Cable Kit provides weather-resistant, certified cables for connecting a solar panel to a charge controller, and from the charge controller to the battery.

Features:

• Designed to connect a PV array to a charge controller and battery
• Weather-resistant and certified cables
• PV and battery cables both have built-in ferrule terminations for quick connections to the charge controller
• Battery cables have built-in fuse and ring terminals

In the Box:

• (1) Pair of (black/red) 20-foot MC4-type PV cables
• (1) Pair of (black/red) 10-foot MC4-type battery cables
  • Built-in 30A DC ATC fuse on the red cable

Solar Starter Cable Kit Xantrexââ¬â¢s Solar Starter Cable Kit provides weather-proof certified cables for connecting solar panels to the charge controller and from the charge controller to the battery.
SKU: NVN-87988
MPN: 708-0150
UPC: