![Fireboy-Xintex GasolinePropane Sensor Only [FS-T01-S-R]](https://www.bestmarinewiring.com/wp-content/uploads/2026/08/fireboy-xintex-gasolinepropane-sensor-only-fs-t01-s-r.webp)
Description
Gasoline & Propane Sensor Only
This sensor is a replacement for Fireboy-Xintex P systems.
Installation:
- The sensor should be located by the propane-powered appliance, near the floor
- Avoid areas where damage may take place due to cleaning, mopping, kicking, or other physical damage
- Harsh chemicals should not be used to clean sensors
- Use the appropriate 8 mounting hardware to mount the Propane Fume Sensor in the desired location
- The rubber gasket should be installed between the sensor and the mounting surface
- Connect to the extension cable using the attached quick-disconnect connectors (Sold Separately)
![Sea-Dog Bilge Pump Water Alarm Panel w/Switch [423037-1]](https://www.bestmarinewiring.com/wp-content/uploads/2026/08/sea-dog-bilge-pump-water-alarm-panel-w-switch-423037-1.webp)
![Metro Marine Piling Mount f/F-Series Round Fixtures [F-R1-PMT]](https://www.bestmarinewiring.com/wp-content/uploads/2026/08/metro-marine-piling-mount-f-f-series-round-fixtures-f-r1-pmt.webp)
![Garmin Replacement Propeller f /gWind & GND 10 [010-12117-08]](https://www.bestmarinewiring.com/wp-content/uploads/2026/08/garmin-replacement-propeller-f-gwind-gnd-10-010-12117-08.webp)
![Jabsco Motor Cover f /37010 Series [43990-0051]](https://www.bestmarinewiring.com/wp-content/uploads/2026/08/jabsco-motor-cover-f-37010-series-43990-0051.webp)
