Description
Pressure Transducer 0 to 50 PSI
All Maretron pressure transducer assemblies are equipped with a 1/4” NPT male threaded fitting. Install the pressure transducer to a ¼” NPT female fitting on the system or tank to be monitored with a maximum torque of 150 in-lbs (16.95 Nm). If you are monitoring a system where pressure spikes or transients will occur, or where the pressure will exceed the maximum pressure rating of the pressure transducer, install a Pressure Snubber (PT-SNUB-01) onto the system being monitored first, then install the pressure transducer to the female port on the pressure snubber.
![Garmin NMEA 2000 Backbone /Drop Cable - 1 (0.3M) - *Case of 10* [010-11076-03CASE]](https://www.bestmarinewiring.com/wp-content/uploads/2026/08/garmin-nmea-2000-backbone-drop-cable-1-0-3m-case-10-010-11076-03case.webp)
![Maretron Motion Detector f /SIM100 [IS216]](https://www.bestmarinewiring.com/wp-content/uploads/2026/08/maretron-motion-detector-f-sim100-is216.webp)