Place Order Water Pump Impeller Kit – Fits Suzuki 60-100 HP (Replaces 17461-87E00/10/11/12)

Description

Water Pump Impeller KitFits Suzuki 60-100 HP (Replaces 17461-87E00/10/11/12)

This water pump impeller kit is designed for a range of Suzuki 2-stroke and 4-stroke outboard engines, from 60 to 100 HP, manufactured between 1998 and 2007. It serves as a direct replacement for multiple OEM part numbers, ensuring a precise fit and restoring your engine’s cooling system performance.

Directly replaces Suzuki part numbers 17461-87E00, 17461-87E10, 17461-87E11, and 17461-87E12, along with Sierra part number 18-3049.

• Engine Mount installation for straightforward replacement.
• Impeller is constructed from a durable, modern Neoprene compound for longevity.
• Kit includes the essential impeller and drive key for a complete service.

Part Number Cross-Reference

Use this table to confirm equivalent part numbers across OEM and aftermarket brands.

Brand	Part Number
Suzuki	17461-87E00
Suzuki	17461-87E10
Suzuki	17461-87E11
Suzuki	17461-87E12
Sierra	18-3049

Compatible Engine Models

For Suzuki owners, You can review exploded diagrams here to verify part numbers: Suzuki Parts Diagrams & Catalog.

Brand	Model	Rated HP	Stroke	Years	OEM Part No.	Notes
Suzuki	DT90	90	2-Stroke	1998-2007	17461-87E00/10/11/12
Suzuki	DT100	100	2-Stroke	1998-2007	17461-87E00/10/11/12
Suzuki	DF60	60	4-Stroke	1998-2007	17461-87E00/10/11/12
Suzuki	DF70	70	4-Stroke	1998-2007	17461-87E00/10/11/12
Suzuki	DF80	80	4-Stroke	1998-2007	17461-87E00/10/11/12
Suzuki	DF90	90	4-Stroke	1998-2007	17461-87E00/10/11/12

Technical Specifications

Specification	Value
Product Type	Water Pump Impeller Kit
Installation	Engine Mount
Housing Material	Neoprene (Impeller)
Dimensions	299.97 × 199.9 × 59.94 mm (11.81 × 7.87 × 2.36 in) [Package]
Weight	0.085 kg (3 oz)
Other Technical Attributes	Modern Neoprene construction

Package Contents

• 1 x Water Pump Impeller with Key (Replaces 17461-87E00/10/11/12)

Installation Guide

Follow these general steps to replace your water pump impeller. Warning: Always disconnect the battery before starting any engine work.

1. Disconnect the negative battery terminal to prevent accidental starting.
2. Place a drain pan under the lower unit and remove the gear lube drain screw to empty the oil.
3. Unbolt and carefully detach the lower unit (gearcase) from the engine’s upper assembly.
4. Locate the water pump housing on top of the lower unit and remove its mounting bolts.
5. Slide the housing up and off the driveshaft, exposing the old impeller.
6. Remove the old impeller and the drive key from the driveshaft. Note the direction of the old impeller’s vanes.
7. Clean the inside of the housing and the base plate, inspecting for scoring or damage. Replace the housing if it is worn.
8. Install the new drive key into the driveshaft keyway.
9. Slide the new impeller onto the driveshaft, aligning it with the key. Rotate the driveshaft clockwise while pushing down to correctly orient the vanes.
10. Reassemble the water pump housing with any new gaskets or seals included in a full kit.
11. Reattach the lower unit to the engine, ensuring the driveshaft and shift shaft align properly.
12. Refill the gearcase with fresh marine gear lube and reconnect the battery before testing.

Troubleshooting & FAQ

Q: How do I confirm this impeller fits my Suzuki engine?

A: Start by checking your engine’s model, horsepower, and year against the “Compatible Engine Models” table. Next, use the “Part Number Cross-Reference” to see if your old part number matches. For final verification, we recommend using the Suzuki parts diagrams linked above to visually confirm the part’s application in your specific engine.

Q: What are the common signs of a failing water pump impeller?

A: The most common indicators include a weak or pulsating water stream from the “tell-tale” outlet, an engine temperature alarm sounding, or the engine visibly overheating on your gauge. You should stop the engine immediately if overheating occurs.

Q: How often should I replace the water pump impeller?

A: For preventative maintenance, it is best practice to replace the impeller every 1 to 2 years or every 100-200 operating hours, whichever comes first. Frequency should increase if you operate in silty, sandy, or saltwater conditions.

Q: OEM vs. Aftermarket?

A: This listing is an aftermarket replacement part (not an OEM component). We build to OEM specifications using comparable-grade materials. Production is done in an ISO9002-certified facility, and each batch is inspected for consistent performance.

Q: How fast do you ship and how much does it cost?

A: We offer fast global shippingtypically 515 days worldwideand standard shipping is free. Expedited options are available at checkout depending on your location.

Q: What is your warranty and return policy?

A: This product includes a 1-year warranty against manufacturing defects under normal use. If something goes wrong, contact our support team with your order details. Returns are accepted within our standard return window (unused & in original condition); please see our policy page or reach out for instructions.

Important Notes

• Verify that the product images and specifications match your original part. If discrepancies existeven if your model is listeddo not proceed with the purchase.
• This product is an aftermarket replacement part and is not an OEM component.
• Professional installation is recommended to ensure safety and optimal performance.

Why Choose JLM MARINE?

• Quality Assured: As a trusted manufacturer for over 20 years, we supply top marine brands globally.
• Fast Global Shipping: Free delivery worldwide in 515 days.
• Direct from Manufacturer: Competitive pricing without compromising quality.